The best AR-15 upper: complete uppers by caliber and barrel length
Quick answer: for a 16 inch 5.56 upper that comes with its bolt carrier group and charging handle, our pick is the Daniel Defense DDM4 V7: Daniel Defense lists the BCG and the GRIP-N-RIP charging handle as parts of it, on a cold hammer forged, mid-length barrel. The 14.5 inch alternative is the Geissele Super Duty MOD1, which Geissele says "meets the 16" minimum barrel length requirement with the pinned and welded muzzle device". For a short barrel, the Daniel Defense MK18 (10.3 in, under the 16 inch line). For a piston, the PWS MK116 MOD 2-M. For lower cost, the Aero Precision M4E1 16 inch (around $590), which comes without a BCG or charging handle. For 300 Blackout, the PWS MK109 MOD 2-M piston upper, the Daniel Defense DDM4 300 S direct impingement upper, or the lower-cost Aero M4E1 10 inch .300 Blackout without a BCG. For 6mm ARC, the CMMG Mk4 Resolute, which has no OpticsPlanet reviews yet.
We did not fire or test these uppers. Each spec names its source, ratings are OpticsPlanet shoppers', and editorial picks are named with their source.
Choosing an upper starts with what it includes (bolt carrier group and charging handle) and the barrel length, because a barrel under 16 inches on a rifle lower makes a short-barreled rifle under the federal definition. Then compare the barrel and gas system, then the handguard and weight, then the owner record.
AR-15 uppers compared
| Upper | Caliber | Barrel and twist | Muzzle thread | Operating system | Handguard | BCG / charging handle | Weight | OpticsPlanet reviews | Price |
|---|---|---|---|---|---|---|---|---|---|
| Daniel Defense DDM4 V7 Upper Receiver Group, 16 in 5.56 Best overall 5.56 complete upper | 5.56 NATO | 16 in, 1:7 (Daniel Defense) | 1/2x28 (OpticsPlanet) | Direct impingement, mid-length (Daniel Defense) | MFR 15.0, M-LOK (Daniel Defense) | Both (Daniel Defense and OpticsPlanet) | 4.0 lbs (Daniel Defense) | 4.6/5, 14 reviews (8 Verified Owner) | around $1,350 |
| Geissele Super Duty MOD1 Complete Upper, 14.5 in 5.56 14.5 in pinned and welded alternative | 5.56 | 14.5 in, 1-7, pinned and welded muzzle device (Geissele) | 1/2x28 (Geissele) | Direct impingement, mid length (Geissele; DI per OpticsPlanet) | 13.5 in MK16 (Geissele) | Both (Geissele) | Not comparable: Geissele lists 4 lbs 3 oz, the listing differs | 4.9/5, 10 reviews (9 Verified Owner) | around $1,350 |
| Daniel Defense MK18 Upper Receiver Group, 10.3 in 5.56 Short-barrel pick (10.3 in, NFA) | 5.56 NATO | 10.3 in, 1:7 (Daniel Defense) | 1/2x28 (OpticsPlanet) | Direct impingement, carbine length (Daniel Defense) | RIS II MK18, Picatinny (Daniel Defense) | Both (Daniel Defense) | Not comparable: Daniel Defense 3.5 lbs, OpticsPlanet 3.8 lb | 4.9/5, 38 reviews (30 Verified Owner) | around $1,550 |
| PWS MK116 MOD 2-M Upper, 16 in .223 Wylde Piston-driven 5.56 pick | .223 Wylde | 16 in, 1:8 (PWS) | 5/8x24 (OpticsPlanet) | Long-stroke piston, 3-setting adjustable gas (PWS) | PicLok (PWS) | Charging handle (PWS); BCG listed by OpticsPlanet only | Not comparable: PWS 4 lbs, OpticsPlanet 4.6 lbs | 5.0/5, 7 reviews (5 Verified Owner) | around $1,400 |
| Aero Precision M4E1 Complete Upper, 16 in 5.56 Mid, 15 in M-LOK Lower-cost 5.56 upper (no BCG or charging handle) | 5.56 NATO | 16 in, 1/7 (OpticsPlanet) | 1/2x28 (OpticsPlanet) | Mid-length gas tube, low profile gas block (OpticsPlanet) | 15 in Gen 2 Enhanced, M-LOK (OpticsPlanet) | Neither (OpticsPlanet) | Not comparable: sources differ | 4.5/5, 25 reviews (22 Verified Owner) | around $590 |
| PWS MK109 MOD 2-M Upper, .300 AAC Blackout Piston 300 Blackout pick | 300 BLK | 9.75 in as listed (PWS: 9 in), 1:6 | 5/8x24 (OpticsPlanet) | Long-stroke piston, 3-setting adjustable gas (PWS) | PicLok (PWS) | Charging handle (PWS and OpticsPlanet); BCG not stated | Not comparable: three figures | 4.0/5, 5 reviews (5 Verified Owner) | around $1,400 |
| Daniel Defense DDM4 300 S Upper Receiver Group, 10.3 in 300 BLK Direct impingement 300 Blackout pick | 300 BLK | 10.3 in, 1:8 (Daniel Defense) | 5/8x24 (OpticsPlanet) | Direct impingement, pistol length (Daniel Defense) | DDM4 Rail 9.0, Picatinny (Daniel Defense) | Both (Daniel Defense); OpticsPlanet lists the BCG only | 3.65 lbs (Daniel Defense) | 5.0/5, 16 reviews (13 Verified Owner) | around $1,450 |
| Aero Precision M4E1 Threaded 10 in .300 Blackout Complete Upper, ATLAS R-ONE Lower-cost 300 Blackout upper (no BCG or charging handle) | 300 BLK | 10 in, 1 in 7 (Aero) | 5/8x24 (Aero) | Pistol length gas tube, low profile gas block (Aero) | ATLAS R-ONE (Aero) | Neither (Aero) | Not published for the upper | 4.4/5, 24 reviews (12 Verified Owner) | around $550 |
| CMMG Mk4 Resolute Upper Group, 6mm ARC, 16.1 in 6mm ARC pick | 6mm ARC | 16.1 in, 1:7.5 (CMMG) | 5/8x24 (CMMG) | Direct impingement (CMMG) | CMMG EML15 M-LOK (CMMG) | Both (CMMG) | Not comparable: CMMG 4.3 lbs, OpticsPlanet 3.9 lb | No reviews yet | around $820 |
The name in parentheses says whose figure it is. Where the sources disagree on weight, the row says "not comparable". Ratings are OpticsPlanet's, shown with the number of reviews. Prices are bands; confirm the current price and availability on the retailer page.
Complete, assembled or stripped upper: what each includes
AR15Parts, a parts retailer, defines a stripped upper as "just the bare upper receiver, no barrel, bolt carrier group, handguard, or charging handle". Aero builds its 10 inch .300 Blackout complete upper on an "M4E1 Threaded Assembled Upper Receiver" and writes that it "Includes port door and forward assist installed". A complete upper adds the barrel, gas system and handguard, and here the makers part ways. Daniel Defense says its complete upper receiver groups "come standard with an M16 profile bolt carrier group", and CMMG says its upper groups "come complete with bolt carrier group". Aero Precision writes: "This complete upper does not include BCG or Charging Handle."
Search results for "ar15 upper" mix stripped receivers in with complete uppers, so read the parts list before comparing prices. If an upper arrives without them, see our BCG picks and charging handle picks. 27 CFR 478.12 says of AR-15/M-16 variant firearms, "The receiver is the lower part of the weapon that provides housing for the trigger mechanism and hammer". Every pick is a complete AR-15 upper; for a .308 upper, see our Aero Precision M5 review, and for how the two platforms differ, our AR-10 vs AR-15 guide.
Barrel length and the 16-inch line
26 U.S.C. 5845(a)(3) lists "a rifle having a barrel or barrels of less than 16 inches in length" as an NFA firearm. 18 U.S.C. 921(a)(8) defines a short-barreled rifle as a rifle with a barrel "less than sixteen inches in length", or a weapon made from a rifle with an overall length of "less than twenty-six inches". These picks have barrels under 16 inches: the Daniel Defense MK18 and DDM4 300 S (10.3 in), the Aero M4E1 .300 Blackout (10 in) and the PWS MK109 MOD 2-M (9.75 in as OpticsPlanet lists it, 9 in per PWS). Put one on a rifle lower and the result is a short-barreled rifle under that definition.
The makers' own notes, in their words:
- Daniel Defense MK18: "Once this part is assembled into a complete firearm, it becomes a regulated item by the National Firearms Act (NFA). Please check with your local and state municipalities for any further regulatory requirements."
- Daniel Defense DDM4 300 S: "This firearm is a regulated item by the National Firearms Act (NFA)."
- Geissele Super Duty MOD1, 14.5 in: "This item meets the 16" minimum barrel length requirement with the pinned and welded muzzle device, however it requires registration and a tax stamp with the Bureau of Alcohol, Tobacco, Firearms and Explosives (BATFE) if the muzzle device is not permanently attached when assembled into a complete rifle." Geissele adds: "Additional state and local restrictions may apply."
- Aero M4E1 10 in .300 Blackout: "The muzzle brake that comes with this complete upper receiver is NOT pinned nor welded to this barrel."
5.56 NATO uppers
The 5 picks in 5.56 or .223 Wylde span three barrel lengths. The 10.3 inch MK18 sits under the 16 inch line. Geissele says its 14.5 inch upper "meets the 16" minimum barrel length requirement with the pinned and welded muzzle device". The 16 inch uppers differ in what they include and in how they run (direct impingement or piston).
Best overall 5.56 complete upper: Daniel Defense DDM4 V7 Upper Receiver Group, 16 in 5.56
Card: 23-128-02339-047, Black · 16 in 5.56 NATO barrel, mid-length direct impingement · BCG and GRIP-N-RIP charging handle listed by Daniel Defense
around $1,350exact price on OpticsPlanet
Daniel Defense builds it around a cold hammer forged, chrome lined 16 inch barrel with a 1:7 twist and a mid-length direct impingement gas system. The handguard is the free-floating MFR 15.0 with M-LOK. Daniel Defense lists an M16 profile bolt carrier group and the ambidextrous GRIP-N-RIP charging handle as parts of the upper, and gives its weight as 4.0 lbs. Pew Pew Tactical ranks the 16 inch DDM4 V7 its "Runner Up High-End AR-15 Upper", an editorial pick rather than an award, and writes that its own unit "has been 100% reliable for us even when suppressed." Choose the Geissele below if you want a 14.5 inch barrel with a pinned and welded muzzle device.
Pros
- Daniel Defense names the M16 profile BCG and the GRIP-N-RIP charging handle in this upper's parts list.
- A verified owner writes: "It shoots softer than any DD I've had before due to the mid length gas system".
Cons
- Two reviewers with the Verified Owner tag found the vertical grip and its screws loose in the box. One writes: "I was surprised to see that the hand grip and screws for said grip were just thrown in the box."
- Sights are sold separately, per Daniel Defense.
- Daniel Defense's page gives no lower compatibility statement.
Key specifications
| Barrel | 16 in, cold hammer forged, chrome lined, 1:7, Government profile (Daniel Defense) |
|---|---|
| Gas | Mid-length, direct impingement, pinned low profile gas block (Daniel Defense) |
| Handguard | MFR 15.0, M-LOK, free-floating (Daniel Defense) |
| Muzzle device | Daniel Defense Flash Suppressor (Daniel Defense) |
| BCG / charging handle | M16 profile BCG; GRIP-N-RIP (Daniel Defense) |
| Weight | 4.0 lbs (Daniel Defense; OpticsPlanet 4 lb) |
| Warranty | 100% satisfaction guarantee against defects in original materials and workmanship (Daniel Defense) |
14.5 in pinned and welded alternative: Geissele Super Duty MOD1 Complete Upper, 14.5 in 5.56
Card: 08-547B, Black (Geissele model 08-547, Black or DDC) · 14.5 in barrel, pinned and welded HUXWRX flash hider · BCG and Airborne Charging Handle listed by Geissele
around $1,350exact price on OpticsPlanet
Geissele lists a 14.5 inch cold hammer forged, chrome lined barrel with a 1-7 twist and the HUXWRX flash hider pinned and welded. Gas is mid length through its Super Compact Gas Block, under a 13.5 inch MK16 rail with a center tab. The spec table names the Nanoweapon Reliability Enhanced BCG and the Airborne Charging Handle. Geissele states that the upper "meets the 16" minimum barrel length requirement with the pinned and welded muzzle device". Nine of its ten OpticsPlanet reviews carry the Verified Owner tag.
Pros
- Geissele's spec table names the bolt carrier group and the Airborne Charging Handle. A verified owner adds: "it also came with the Airborne Charging Handle which is really nice so no need to upgrade there."
- Nine of ten OpticsPlanet reviews carry the Verified Owner tag.
Cons
- Geissele's NFA note: it "requires registration and a tax stamp with the Bureau of Alcohol, Tobacco, Firearms and Explosives (BATFE) if the muzzle device is not permanently attached when assembled into a complete rifle."
- Geissele lists 4 lbs 3 oz. Two reviewers with the Verified Owner tag list weight as a con.
- Geissele's page states no warranty and no box contents.
Key specifications
| Barrel | 14.5 in, cold hammer forged, chrome lined, 1-7, pin and weld (Geissele) |
|---|---|
| Gas | Mid length, Super Compact Gas Block, direct impingement (Geissele; DI per OpticsPlanet) |
| Handguard | 13.5 in MK16 with Geissele Center Tab (Geissele) |
| Muzzle device | HUXWRX Flash Hider- QD 556 (Geissele) |
| BCG / charging handle | Nanoweapon Reliability Enhanced BCG; Airborne Charging Handle (Geissele) |
| Weight | 4 lbs 3 oz (Geissele) |
| Overall length | 24 in (Geissele) |
Short-barrel pick (10.3 in, NFA): Daniel Defense MK18 Upper Receiver Group, 10.3 in 5.56
Card: 23-004-08013-012, Flat Dark Earth row on OpticsPlanet · 10.3 in 5.56 NATO barrel, carbine length direct impingement · BCG and GRIP-N-RIP charging handle listed by Daniel Defense
around $1,550exact price on OpticsPlanet
Daniel Defense lists a cold hammer forged 10.3 inch Government profile barrel with a 1:7 twist and a carbine length direct impingement gas system. The rail is the RIS II MK18 on a Picatinny mounting system. The parts list names an M16 profile bolt carrier group and the GRIP-N-RIP charging handle. The barrel is under 16 inches, and Daniel Defense's own NFA note says: "Once this part is assembled into a complete firearm, it becomes a regulated item by the National Firearms Act (NFA)." It carries 38 OpticsPlanet reviews, 30 of them tagged Verified Owner. Pew Pew Tactical names the Daniel Defense MK18 its "Best MK18 Upper".
Pros
- A verified owner reports: "I have put 1k rounds through it. No failures."
- Reviewers with the Verified Owner tag report fitting it to Aero Precision, DDM4, LMT and Smith M&P lowers.
Cons
- Under 16 inches: on a rifle lower it makes a short-barreled rifle under the federal definition (see the barrel length section).
- Weights differ: Daniel Defense lists 3.5 lbs, OpticsPlanet 3.8 lb. One reviewer lists "Weight, this is a solid chunk of metal" as a con.
- Pew Pew Tactical lists "Gassy especially when suppressed" as its con for the MK18.
Key specifications
| Barrel | 10.3 in, cold hammer forged, chrome lined, 1:7, Government profile (Daniel Defense) |
|---|---|
| Gas | Carbine length, direct impingement, pinned low profile gas block (Daniel Defense) |
| Handguard | RIS II MK18, Picatinny (Daniel Defense) |
| Muzzle device | Daniel Defense Flash Suppressor (Daniel Defense) |
| BCG / charging handle | M16 profile BCG; GRIP-N-RIP (Daniel Defense) |
| Weight | 3.5 lbs (Daniel Defense); 3.8 lb (OpticsPlanet) |
Piston-driven 5.56 pick: PWS MK116 MOD 2-M Upper, 16 in .223 Wylde
Card: MK1-M2U-223-16, Black · long-stroke piston with 3-setting adjustable gas · Radian Raptor ambidextrous charging handle
around $1,400exact price on OpticsPlanet
PWS runs this upper on its long-stroke piston system with a 3-setting adjustable gas system, and describes the piston system as "Renowned for reliability and reduced fouling". The 16 inch .223 Wylde barrel has a 1:8 twist, and PWS says the chamber accommodates "both .223 Remington and 5.56mm NATO". The handguard is PWS's PicLok (Picatinny and M-LOK), and the charging handle is a Radian Raptor ambidextrous unit. PWS also states a "Sub-MOA Accuracy Guarantee" with high-grade ammo, and a warranty that is "fully transferable with no need for proof of purchase". Pew Pew Tactical names the MK116 MOD 2-M its "Best Piston Upper".
Pros
- PWS describes the upper as "Suppressor Optimized", with adjustable gas settings.
- All seven OpticsPlanet reviews are five stars. A verified owner writes: "fit and finish look great, fits on my mill spec lower".
Cons
- Pew Pew Tactical lists "Uses a proprietary piston/BCG combo" as a con.
- PWS's page does not list a bolt carrier group; the OpticsPlanet spec table lists one as "MIL-SPEC".
- Weights differ: PWS lists 4 lbs, the listing 4.6 lbs. Seven reviews is a small record.
Key specifications
| Barrel | 16 in .223 Wylde, 1:8 (PWS; the listing also says 16.1 in) |
|---|---|
| Operating system | PWS long-stroke piston, 3-setting adjustable gas (PWS) |
| Handguard | PicLok, Picatinny and M-LOK (PWS); 15 in (OpticsPlanet) |
| Muzzle device | PWS FRC 2-Port Compensator (PWS) |
| Charging handle | Radian Raptor ambidextrous (PWS) |
| Receiver | Forged 7075-T651 aluminum (PWS) |
| Weight | 4 lbs (PWS); 4.6 lbs (OpticsPlanet) |
Lower-cost 5.56 upper (no BCG or charging handle): Aero Precision M4E1 Complete Upper, 16 in 5.56 Mid, 15 in M-LOK
Card: APAR640251M7, Black anodized · 16 in 5.56 NATO barrel, mid-length gas · bolt carrier group and charging handle NOT included (OpticsPlanet spec)
around $590exact price on OpticsPlanet
The OpticsPlanet listing builds this upper on a forged 7075-T6 M4E1 receiver with the port door and forward assist installed. The 16 inch 4150 CrMoV barrel has a QPQ finish and a 1/7 twist, with mid-length gas. Over it sits the 15 inch Gen 2 Enhanced free-float M-LOK handguard. Its spec table says "Bolt Carrier Group Included: No" and "Charging Handle Included: No", so add both to the cost before you compare it with the Daniel Defense. 22 of its 25 OpticsPlanet reviews carry the Verified Owner tag.
Pros
- 22 of 25 OpticsPlanet reviews carry the Verified Owner tag.
- Reviewers report it on Aero, billet, PSA and other makers' lowers.
- For a later handguard swap, the OpticsPlanet listing says the receiver "Works with Aero Precision handguards but also fits most BAR-system handguards."
Cons
- No bolt carrier group or charging handle. A verified owner confirms: "Does not come with bcg or charging handle".
- Three of 25 reviews report function problems. One describes a seized bolt and one a rifle that would not cycle. The third found the gas tube and gas block misaligned.
- Pew Pew Tactical removed Aero Precision from its complete upper list in its August 2026 update. Its .300 Blackout list, last updated June 2025, still names Aero's M4E1 .300 BLK uppers "Best Mid-Tier Uppers".
Key specifications
| Barrel | 16 in 5.56 NATO, 4150 CrMoV, QPQ, 1/7 (OpticsPlanet listing) |
|---|---|
| Gas | Mid-length, .0785 gas port, low profile gas block (OpticsPlanet listing) |
| Handguard | 15 in Gen 2 Enhanced, M-LOK, free float (OpticsPlanet listing) |
| Muzzle device | A2 flash hider (OpticsPlanet listing) |
| BCG / charging handle | Not included (OpticsPlanet listing) |
| Receiver | Forged 7075-T6, port door and forward assist installed (OpticsPlanet listing) |
What changes for 300 Blackout
SAAMI's Z299.4 centerfire rifle standard includes a drawing sheet titled "300 AAC BLACKOUT [300 BLK]". For bolts and magazines, the plainest maker statement we found is Daniel Defense's, for its own 300 S: "the 300S Upper Receiver Group uses standard 5.56 bolts and magazines". Aero and PWS do not name the bolt or the magazines on the pages we read for their uppers, so treat it as a fact about the Daniel Defense model only.
The 3 300 Blackout picks run from 9 to 10.3 inches with 1:6, 1:7 and 1:8 twists. Barrel length and twist are argued, not settled. Pew Pew Tactical writes that the round "reaches peak ballistic potential from a 9-inch barrel". On AR15.com one poster says "Twist 1:7 will shoot almost anything you want in a 300 BO.", while another argues for "16-18 inches producing noticeable better velocity" with supersonic loads. Every one of these uppers is under 16 inches, so the barrel length section above applies. The 16 inch 300 Blackout listing we checked on OpticsPlanet had two owner reviews that name that barrel, too few for us to card it. Our Radian Model 1 review covers another .300 Blackout complete upper.
On suppressors and gas, PWS describes the MK109 MOD 2-M as "Suppressor Optimized" and gives it a "3-setting Adjustable Gas System". Daniel Defense lists a pinned low profile gas block and a pistol length direct impingement system for the 300 S, and writes of "a wide variety of factory ammunition" made for uses that include "suppressed operation". Aero lists a pistol length gas tube with a .0935 gas port, and threads the muzzle 5/8x24.
300 Blackout uppers
The PWS runs a piston with adjustable gas, and Daniel Defense documents the bolt and magazine question for its 300 S. The Aero costs less but leaves the bolt carrier group and charging handle to you.
Piston 300 Blackout pick: PWS MK109 MOD 2-M Upper, .300 AAC Blackout
Card: MK1-M2U-300BLK-9, Black · 9.75 in barrel as OpticsPlanet lists it (PWS lists 9 in), 1:6 twist · long-stroke piston with 3-setting adjustable gas
around $1,400exact price on OpticsPlanet
PWS builds the MK109 MOD 2-M on its long-stroke piston with a 3-setting adjustable gas system, and says the chambering is designed "for both super and subsonic 300 BLK ammunition". OpticsPlanet lists the barrel at 9.75 in; PWS's page lists 9 in with a 1:6 twist. Both figures are under 16 inches. The listing and PWS both name the Radian Raptor ambidextrous charging handle, and PWS states a "Sub-MOA Accuracy Guarantee" with high-grade ammo. A verified owner running 220 grain subsonics under a Nomad suppressor calls it "very quiet". The video shows OpticsPlanet's range clip of a complete rifle built on an upper marked MK109 / MOD 2-M.
Pros
- PWS lists a 3-setting adjustable gas system and describes the upper as "Suppressor Optimized".
- All five OpticsPlanet reviews carry the Verified Owner tag.
Cons
- Neither OpticsPlanet nor PWS states whether a bolt carrier group is included. Confirm it before you order.
- On a forum, an owner of a PWS MK109 SBR (version not stated) wrote: "Without the suppressor, it wont cycle sub sonics."
- Weight figures disagree: the listing gives 3.5 lbs in its features and 5.6 pounds in its description, and PWS lists 4 lbs.
Key specifications
| Barrel | 9.75 in (OpticsPlanet); 9 in, 1:6 (PWS) |
|---|---|
| Operating system | PWS long-stroke piston, 3-setting adjustable gas (PWS); pistol length (OpticsPlanet) |
| Handguard | PicLok, Picatinny and M-LOK (PWS) |
| Muzzle device | PWS FRC 2-Port Compensator (PWS) |
| Charging handle | Radian Raptor ambidextrous (PWS and OpticsPlanet) |
| Bolt carrier group | Not stated by OpticsPlanet or PWS |
Direct impingement 300 Blackout pick: Daniel Defense DDM4 300 S Upper Receiver Group, 10.3 in 300 BLK
Card: 23-088-19020-047, Black · 10.3 in S2W profile barrel, 1:8 twist, pistol length direct impingement · BCG and GRIP-N-RIP charging handle listed by Daniel Defense
around $1,450exact price on OpticsPlanet
Daniel Defense lists a cold hammer forged 10.3 inch S2W profile barrel with a 1:8 twist and a pistol length direct impingement gas system. The rail is the DDM4 Rail 9.0 on a Picatinny mounting system. The parts list names an M16 profile bolt carrier group and the GRIP-N-RIP charging handle, and the listed weight is 3.65 lbs. It also states that "the 300S Upper Receiver Group uses standard 5.56 bolts and magazines". All 16 OpticsPlanet reviews are five stars, and 13 carry the Verified Owner tag. One verified owner ran loads from 110 grain supers to 220 grain subs: "All cycled flawlessly, all locked back on the last shot, no matter whether I was shooting supers or subs, suppressed or unsuppressed."
Pros
- Daniel Defense names the bolt carrier group and the GRIP-N-RIP charging handle in this upper's parts list.
- Daniel Defense's statement on standard 5.56 bolts and magazines covers this model directly.
Cons
- Daniel Defense's NFA note: "This firearm is a regulated item by the National Firearms Act (NFA)."
- The OpticsPlanet listing leaves out the charging handle Daniel Defense lists. Its Features name a vertical grip that is not in Daniel Defense's parts list.
- Two reviewers with the Verified Owner tag list weight as a con. One writes: "It is heavy because of the pic rails on top, bottom, left and right".
Key specifications
| Barrel | 10.3 in, cold hammer forged, chrome lined, 1:8, S2W profile (Daniel Defense) |
|---|---|
| Gas | Pistol length, direct impingement, pinned low profile gas block (Daniel Defense) |
| Handguard | DDM4 Rail 9.0, Picatinny (Daniel Defense) |
| Muzzle device | Daniel Defense Flash Suppressor (Daniel Defense) |
| BCG / charging handle | M16 profile BCG; GRIP-N-RIP (Daniel Defense) |
| Weight | 3.65 lbs (Daniel Defense and OpticsPlanet) |
Lower-cost 300 Blackout upper (no BCG or charging handle): Aero Precision M4E1 Threaded 10 in .300 Blackout Complete Upper, ATLAS R-ONE
Card: APAR700702M4, Black anodized, ATLAS R-ONE handguard · 10 in barrel, 1 in 7 twist, pistol length gas tube · bolt carrier group and charging handle NOT included (Aero)
around $550exact price on OpticsPlanet
Aero lists a 10 inch 4150 CMV barrel with a QPQ finish inside and out and a 1 in 7 twist, threaded 5/8x24. A low profile gas block feeds a pistol length gas tube under the ATLAS R-ONE handguard. The enhanced forged receiver comes with the port door and forward assist installed. Aero writes: "This complete upper does not include BCG or Charging Handle." It also writes that the muzzle brake is "NOT pinned nor welded to this barrel." A verified owner reports: "Shot both subsonic and supersonic ammo without fail."
Pros
- 12 of its 24 OpticsPlanet reviews carry the Verified Owner tag.
- A verified owner who ran 200 rounds lists "No issues with a suppressor" among the pros.
Cons
- No bolt carrier group or charging handle. One two-star verified review is titled "NOT A CONPLETE UPPER RECEIVER".
- Aero's 21 oz figure sits under the barrel features, not the whole upper. A verified owner who weighed the upper found it over 40 ounces.
- The 24 reviews pool four rows of this listing, with R-ONE and S-ONE handguards in black and FDE.
- Under 16 inches: on a rifle lower it makes a short-barreled rifle under the federal definition.
Key specifications
| Barrel | 10 in .300 Blackout, 4150 CMV, QPQ, 1 in 7, 5/8x24 (Aero) |
|---|---|
| Gas | Pistol length gas tube, low profile gas block, .0935 gas port (Aero) |
| Handguard | ATLAS R-ONE (Aero); 9 in (OpticsPlanet) |
| Muzzle device | Not pinned or welded (Aero); A2 flash hider (OpticsPlanet) |
| BCG / charging handle | Not included (Aero) |
| Weight | Not published for the upper |
What changes for 6mm ARC
Hornady introduced the 6mm ARC (Advanced Rifle Cartridge) in a press release dated June 3, 2020, saying it "maximizes the potential of the AR-15 platform". SAAMI's Z299.4 includes a drawing sheet titled "6MM ADVANCED RIFLE CARTRIDGE [6MM ARC]". For magazines, CMMG sells a 10-round AR15 magazine it describes as "Designed to be used with 6.5 Grendel, 6mm ARC, or 22 ARC ammunition in a standard AR15 magazine well." CMMG says its Resolute upper group comes complete with a bolt carrier group.
Barrel length is argued in owner threads, with 16, 18 and 20 inch uppers all recommended; one viewer of a 16 inch build asks "why a 16 inch barrel was choosing over an 18 inch?".
6mm ARC upper
We checked a short list of 6mm ARC complete uppers on OpticsPlanet. They carry very few owner reviews, and the CMMG below is our one pick.
6mm ARC pick: CMMG Mk4 Resolute Upper Group, 6mm ARC, 16.1 in
Card: 60B1091-CT, Coyote Tan · 16.1 in barrel, 1:7.5 twist, direct impingement · BCG and ZEROED ambi charging handle listed by CMMG
around $820exact price on OpticsPlanet
CMMG lists a 16.1 inch 416SS, SBN barrel with a 1:7.5 twist. It runs direct impingement with an adjustable 0.750 gas block, on a billet 6061 T6 upper receiver. The handguard is the CMMG EML15 M-LOK and the muzzle device the ZEROED SVB Brake. CMMG says "all CMMG® Upper Groups come complete with bolt carrier group" and lists a ZEROED ambi charging handle and polymer dust cover with it. CMMG designs the group "to pair with any standard AR15 pattern lower group" and backs it with a "Lifetime Quality Guarantee against material and workmanship defects".
Pros
- CMMG lists the bolt carrier group and an ambidextrous charging handle with the upper group.
- CMMG gives a lower compatibility statement, which the Daniel Defense and Geissele pages we read do not.
Cons
- No owner reviews on OpticsPlanet yet. The only comment we found is one Facebook reply, "Cmmg resolute. Have 2 and they're great.", from a single commenter who does not say which length.
- The listing and CMMG disagree on gas: OpticsPlanet says "Pistol Length", CMMG lists the gas port location as "Rifle".
- They also disagree on the receiver (OpticsPlanet 7075, CMMG billet 6061 T6) and weight (OpticsPlanet 3.9 lb, CMMG 4.3 lbs). We use CMMG's figures.
Key specifications
| Barrel | 16.1 in, 416SS, SBN, 1:7.5, 5/8 x 24 (CMMG) |
|---|---|
| Operating system | Direct impingement, adjustable 0.750 gas block (CMMG) |
| Handguard | CMMG EML15 M-LOK (CMMG) |
| Muzzle device | ZEROED SVB Brake (CMMG) |
| BCG / charging handle | Included; ZEROED AR15 Ambi Charging Handle (CMMG) |
| Receiver | Billet 6061 T6 aluminum (CMMG) |
| Weight | 4.3 lbs (CMMG); 3.9 lb (OpticsPlanet) |
Will it fit my lower?
CMMG designs its Resolute group "to pair with any standard AR15 pattern lower group". The Daniel Defense and Geissele product pages we read give no lower compatibility statement, so makers' compatibility notes vary. Owners fill some of the gap. Reviewers with the Verified Owner tag report the MK18 on Aero Precision, DDM4, LMT and Smith M&P lowers. On the PWS MK116, a verified owner writes that it "fits on my mill spec lower". On the Geissele, one reviewer writes "Not a true milspec upper receiver but will fit any milspec lower." On the Aero 10 inch .300 Blackout, a verified owner found that mounting it on an Aero lower "requires a little bit of finagling and pressure to get it on/off your lower."
For the rest of the rifle, compare our trigger picks and AR stock picks.
How we chose these
We did not fire, measure or test these uppers. We carded the exact OpticsPlanet row each button links to and read every OpticsPlanet review for each, counting the Verified Owner tags ourselves. Specs come from each maker's own product page, and from the OpticsPlanet listing for the Aero 16 inch upper and wherever a figure names OpticsPlanet; where the listing and the maker disagree, we use the maker and say so on the card. Legal lines quote the U.S. Code, the federal regulations and the makers' own NFA notes. For the Daniel Defense DDM4 V7 we also checked a deep research pass line by line against Daniel Defense's pages and Pew Pew Tactical's review. Pew Pew Tactical's labels are editorial picks, named only where they cover the same model and barrel length we card. OpticsPlanet's listing for the Aero 16 inch upper carries a shipping notice that begins "ATTENTION! We currently do not ship this product to P.O. Boxes" and goes on to name states and other locations, so check the listing you order from for a notice like it. See our methodology for how we work.
FAQ
What is a complete AR-15 upper?
A complete upper is a barreled upper receiver with the handguard and gas system already installed. Makers use the word differently. Daniel Defense says its complete upper receiver groups "come standard with an M16 profile bolt carrier group", while Aero Precision writes that its complete upper "does not include BCG or Charging Handle." Read the parts list on each card before you compare prices.
Does a complete upper include a BCG?
Not always. Daniel Defense, Geissele and CMMG list a bolt carrier group and a charging handle with their uppers. Both Aero Precision uppers come without either. PWS lists the Radian Raptor charging handle on both of its uppers; the OpticsPlanet listing names a bolt carrier group for the MK116 MOD 2-M, and neither source states one for the MK109 MOD 2-M.
Is a 10.3 or 10.5 inch upper legal on a rifle lower?
Federal law defines a short-barreled rifle as a rifle with a barrel "less than sixteen inches in length" (18 U.S.C. 921(a)(8)), and 26 U.S.C. 5845 lists such a rifle as an NFA firearm. A 10.3 or 10.5 inch upper on a rifle lower falls under that definition. Daniel Defense says its MK18 upper, once assembled into a complete firearm, "becomes a regulated item by the National Firearms Act (NFA)".
What bolt and magazines does a 300 Blackout upper use?
For its DDM4 300 S, Daniel Defense says "the 300S Upper Receiver Group uses standard 5.56 bolts and magazines", and it lists an M16 profile bolt carrier group as part of that upper. That statement covers that model. The Aero 10 inch .300 Blackout upper comes without a bolt carrier group, and PWS does not state whether one comes with the MK109 MOD 2-M.
What magazines does 6mm ARC use?
CMMG, which makes our 6mm ARC pick, sells a 10-round AR15 magazine it describes as "Designed to be used with 6.5 Grendel, 6mm ARC, or 22 ARC ammunition in a standard AR15 magazine well." In other words, CMMG pairs 6mm ARC with a 6.5 Grendel magazine that fits a standard AR-15 magazine well. CMMG also says its Resolute upper group comes complete with a bolt carrier group.
What is the best AR-15 upper?
For a 16 inch 5.56 upper that comes with its bolt carrier group and charging handle, our pick is the Daniel Defense DDM4 V7. The Geissele Super Duty MOD1 is the 14.5 inch alternative with a pinned and welded muzzle device. Choose the MK18 for a 10.3 inch barrel, the PWS MK116 MOD 2-M for a piston, or the Aero M4E1 for lower cost if you supply the bolt carrier group and charging handle.