OpticVerdict Independent buying guides
Search OpticVerdict

9mm vs .380 ACP: what SAAMI and the pistol makers print for each

By the OpticVerdict Editorial Team.
Plain-English guide · Updated 2026-11-15

Quick answer: the 9mm Luger runs at a higher SAAMI pressure than the .380 ACP, which SAAMI names 380 Automatic (380 Auto), and SAAMI lists higher velocities for it from a longer test barrel. SAAMI's ANSI/SAAMI Z299.3-2022 standard sets the maximum average pressure at 35,000 psi for 9mm Luger and 21,500 psi for 380 Auto, by the transducer method. It lists 1,135 and 1,210 fps for 115 gr 9mm Luger loads from a 4.000 in test barrel, and 945 and 990 fps for 95 gr 380 Automatic loads from a 3.750 in test barrel. The bullets are close: SAAMI gives .3555 in for 9mm Luger and .3565 in for 380 Automatic. The bigger practical difference is the pistol. Springfield Armory builds the Hellcat 3" OSP in both calibers and lists the .380 at 16.1 oz and the 9mm at 17.9 oz, each with the flush magazine. Both versions ship with an 11-round and a 13-round magazine. Makers market the .380 as softer and easier to rack. In Shooting Sports Retailer's slide-force test of one sample each, the 9mm M&P Shield EZ took about 12.9 pounds and the M&P380 Shield EZ about 13.75 pounds. Pick the pistol you can rack, grip and carry, then take the caliber it comes in.

The cartridge numbers put the 9mm ahead on pressure and listed velocity. The pistol numbers depend on the model: in Springfield Armory's Hellcat pair, the two calibers differ only in weight.

Cartridge names and SAAMI dimensions

SAAMI, the Sporting Arms and Ammunition Manufacturers' Institute, lists "380 Automatic" with the abbreviated name "380 Auto", and "9mm Luger" with a separate "9mm Luger +P" entry. The European proof commission C.I.P. calls the .380 the 9 mm Browning court. It prints 9mm Browning Kurz (short, corto), 9 mm kurz, 380 ACP and 380 Auto(matic) as alternative names. C.I.P. calls the 9mm the 9 mm Luger, with 9 mm Para(bellum) and 9 x 19 (mm) as alternative names. The makers we read label their .380 loads 380 Auto. Neither SAAMI's standard nor the C.I.P. sheets we read print the name 9x17, which some comparisons give the .380.

Item, per SAAMI380 Automatic (.380 ACP)9mm Luger
SAAMI name380 Automatic (380 Auto)9mm Luger; 9mm Luger +P is a separate entry on the same drawing
Bullet diameter.3565 - .0030 in (9.055 - 0.076 mm).3555 - .0030 in (9.030 - 0.076 mm)
Groove diameter (chamber drawing).355 in (9.02 mm).355 in (9.02 mm)
Bore diameter (chamber drawing).348 in (8.84 mm).346 in (8.79 mm)
Case length.680 - .010 in (17.27 - 0.25 mm).754 - .010 in (19.15 - 0.25 mm)
Cartridge overall length.910 in (23.11 mm) MIN to .984 in (24.99 mm) MAX1.000 in (25.40 mm) MIN to 1.169 in (29.69 mm) MAX
Rim diameter.374 - .010 in (9.50 - 0.25 mm).394 - .010 in (10.01 - 0.25 mm)
Velocity and pressure test barrel3.750 ± .010 in (95.25 ± 0.25 mm)4.000 ± .010 in (101.60 ± 0.25 mm)
Maximum average pressure, transducer21,500 psi; no +P entry35,000 psi; +P: 38,500 psi

Many comparisons say both cartridges use the same .355 in bullet. SAAMI's drawings print .3565 in as the 380 Automatic bullet diameter and .3555 in for the 9mm Luger. The .355 in figure is the groove diameter of the barrel, printed for both chambers. SAAMI notes on each drawing that the bullet profile is shown for illustrative purposes only.

Can you shoot .380 in a 9mm pistol?

Both cartridges carry 9mm in a name. C.I.P. lists 9mm Browning Kurz as an alternative name for the .380, and SAAMI names the other cartridge 9mm Luger.

SAAMI's statement on firearm and ammunition interchangeability does not name the 380 Automatic or the 9mm Luger. It says: "Firearms should only be used with the ammunition designated by the firearm manufacturer for use in that firearm." It also says: "The discharge of ammunition which does not match the firearm markings can be dangerous and can result in serious injury or death to the user and/or bystanders, as well as damage to the firearm." SIG's P365 manual says: "The proper caliber is permanently engraved on your firearm; never attempt to use ammunition of any other caliber." SIG's page for its flush-fit 10-round 380 Auto magazine for the P365X and P365-XL says it is "Not recommended for use with standard 9mm P365" and names the P365-XMACRO, AXG and FUSE in the same note. For the P365, SIG lists a CAL-X kit (SKU 8900719) and says: "This complete CAL-X KIT allows you to convert your P365 to a P365-380." The kit's listed contents include a complete slide assembly and a "3.1-in 380AUTO barrel." SIG also lists the kit as "Not compatible with CA Compliant Fire Control Units (FCU)".

SAAMI says the markings that show which ammunition a firearm takes are usually on its barrel and may instead be on the frame or receiver. It says the best way to check is to confirm that the headstamp on the ammunition matches the markings on the firearm.

Pressure and velocity by the standard

SAAMI sets the maximum average pressure (transducer method) at 21,500 psi for the 380 Auto, 35,000 psi for the 9mm Luger and 38,500 psi for the 9mm Luger +P. SAAMI prints these as 215, 350 and 385 in units of psi/100. SAAMI calls the piezoelectric transducer its preferred system and the copper crusher the older one. By the crusher method, in a column headed CUP/100, it lists 170 for 380 Automatic and 330 for 9mm Luger. It marks the 9mm Luger +P crusher values as not established. Psi and CUP come from different systems and are not one scale.

SAAMI maximum average pressure for 380 Auto and 9mm Luger, transducer method, in psi Three bars drawn to scale from zero. 380 Auto: 21,500 psi. 9mm Luger: 35,000 psi. 9mm Luger +P: 38,500 psi. Source: SAAMI, ANSI/SAAMI Z299.3-2022. SAAMI maximum average pressure, transducer method (psi) 380 Auto 21,500 psi 9mm Luger 35,000 psi 9mm Luger +P 38,500 psi 0 20,000 40,000
Source: SAAMI, ANSI/SAAMI Z299.3-2022, maximum average pressure by the transducer method. Bars are drawn to scale from zero; crusher (CUP) figures are not shown.

SAAMI's current pistol standard (Z299.3-2022) lists the 380 Auto with no +P version; its +P entries are 9mm Luger, 38 Special, 38 Super Automatic and 45 Automatic. For the 9mm Luger +P, SAAMI's footnote says: "This ammunition is loaded to a higher pressure, as indicated by the +P marking on the case headstamp, to achieve higher velocity. Use only in firearms especially designed for this cartridge and so recommended by the manufacturer."

Two of the pistol makers we read address +P for a named .380 model. In the ammunition table of its M&P380 Shield EZ manual, Smith & Wesson marks 380 AUTO "OK" for standard ammunition and "NO" for +P and +P+. Ruger's Security-380 manual says: "Do not use “+P” ammunition."

SAAMI's 2022 pistol standard (ANSI/SAAMI Z299.3) lists nominal mean velocities, measured 15 feet from the muzzle of its test barrels, of 945 and 990 fps for 95 gr 380 Automatic loads (3.750 in test barrel) and 1,135 and 1,210 fps for 115 gr 9mm Luger loads (4.000 in test barrel). The table prints two figures for each of those bullet weights and does not say which bullet type each belongs to. Both the bullet weight and the test barrel differ, so the gap is not the cartridge alone.

SAAMI lists 95 gr and 100 gr loads for both cartridges. Beside the 95 gr 380 Automatic figures above, it lists a 95 gr 9mm Luger load at 1,330 fps from a 4.000 in test barrel. At 100 gr, SAAMI lists 910 fps for 380 Automatic and 1,110 and 1,195 fps for 9mm Luger, from the same two test barrels. The bullet weight matches in these rows, but the test barrel still differs.

The ammunition makers print their own figures, each load from its own test barrel:

Maker and line380 Auto load, as printed9mm Luger load, as printedNote
Speer Gold Dot Handgun Personal Protection23606GD, 90 gr GDHP: 1040 fps, 216 ft-lb, 3.75 in test barrel23614GD, 115 gr GDHP: 1210 fps, 374 ft-lb, 4 in test barrelBullet weights and barrels differ
Speer Lawman (TMJ)53608, 95 gr TMJ RN: 950 fps, 190 ft-lb, 3.75 in test barrel53650, 115 gr TMJ: 1200 fps, 368 ft-lb, 4 in test barrelBullet weights and barrels differ
Federal Personal Defense HSTP380HST1S, 99 gr HST Jacketed Hollow Point: 935 fps, 192 ft-lb, 3.75 in test barrelP9HST1S, 124 gr HST Jacketed Hollow Point: 1150 fps, 364 ft-lb, 4 in test barrelFederal files the .380 load under Personal Defense HST Micro; bullet weights and barrels differ
Federal American EagleAE380AP, 95 gr Full Metal Jacket: 980 fps, 203 ft-lb, 3.75 in test barrelAE9DP, 115 gr Full Metal Jacket: 1180 fps, 356 ft-lb, 4 in test barrelBullet weights and barrels differ
Hornady Critical DefenseItem #90080, 90 gr FTX: 1000 fps, 200 ft-lb, 4 in test barrel per HornadyItem #90250, 115 gr FTX: 1135 fps, 329 ft-lb, 4 in test barrel per HornadyHornady prints a 4 in test barrel for both; bullet weights differ

In each maker's own published data, its 9mm load lists a higher muzzle velocity and muzzle energy than its 380 Auto load in the same line. The 9mm loads use heavier bullets. Speer and Federal test the 380 Auto in a 3.75 in barrel and the 9mm in a 4 in barrel, matching SAAMI's test barrels. A short-barreled pocket pistol will give different numbers. None of the maker pages behind the load table prints a velocity for the same load from two barrel lengths. Speer's catalog says: "Test barrels are used to determine ballistic figures. Individual firearms may vary." None of our sources defines an effective range for either cartridge.

No maker load pair we read shares a bullet weight, and some comparisons put a single percentage on the energy gap. The printed pairs do not support one figure, because the bullet weight changes in every pair.

9mm vs .380 pistols: same maker, two calibers

Springfield Armory builds the Hellcat 3" OSP in .380 ACP and 9mm, and the two spec tables differ only in weight. The table adds same-maker pairs from Sig Sauer, Kimber, Glock, Smith & Wesson and Ruger. Each row gives the weight with the condition the maker prints.

Maker and models.380 version, as listed9mm version, as listedWhat is not equal
Springfield Armory Hellcat 3" OSP.380 ACP, HC931380BOSP: 16.1 oz w/ Flush Mag, 16.5 oz w/ Extended Mag; barrel 3"; length 6"; height 4" w/ Flush Mag; grip width 1"; (1) 11-Round, (1) 13-Round Extended magazines9mm, HC9319BOSP: 17.9 oz w/ Flush Mag, 18.3 oz w/ Extended Mag; barrel 3"; length 6"; height 4" w/ Flush Mag; grip width 1"; (1) 11-Round, (1) 13-Round Extended magazinesOnly the weight differs: 1.8 oz with the flush magazine
Sig Sauer P238 and P938 Two-ToneP238, 238-380-TXR3: 14.9 oz [422.4 g] w/ Magazine; barrel 2.7 in; length 5.5 in; height 3.9 in [99 mm]; overall width 1.1 in [28 mm]; (1) 6rd / (1) 7rd Steel MagP938, 938-9-TXR3-AMBI: 16 oz [454 g] w/ Magazine; barrel 3 in; length 5.9 in; height 3.9 in (100 mm); overall width 1.1 in [28 mm]; (1) 6rd / (1) 7rd Steel MagTwo models: barrel and length differ. 1.1 oz with magazine
Kimber Micro and Micro 9Micro .380 ACP (manual): 13.4 ounces with empty magazine; barrel 2.75 in; length 5.6 in. Micro Two-Tone .380, SKU 3300206: magazine capacity 7; width 1.08 in; height 4.0 in; recoil spring 8.0 lbMicro 9mm (manual): 15.6 ounces with empty magazine; barrel 3.15 in; length 6.1 in. Micro 9 Stainless, SKU 3300158: magazine capacity 7; width 1.06 in; height 4.07 in; recoil spring 11.5 lbBarrel and length differ; width and height come from two SKUs with different finishes. 2.2 oz with empty magazine
Glock G42 and G43G42, .380 Auto: 345 g (12.17 oz) without magazine, 390 g (13.76 oz) with empty magazine, 450 g (15.87 oz) with loaded magazine; barrel 3.25 inch; length 5.94 inch; width 0.98 inch; height incl. magazine 4.13 inch; 6 rounds standardG43, 9x19 mm: 460 g (16.23 oz) without magazine, 510 g (17.99 oz) with empty magazine, 585 g (20.64 oz) with loaded magazine; barrel 3.41 inch; length 6.26 inch; width 1.06 inch; height incl. magazine 4.25 inch; six round magazineTwo models. 4.23 oz with empty magazine; Glock notes its technical data are rounded
Smith & Wesson M&P Shield EZ, Manual Thumb SafetyM&P 380 Shield EZ: 18.5 oz; width 1.04 in; height 5.05 in; capacity 8. Spec sheet, SKU 11663: barrel 3.675 in; overall length 6.7 inM&P9 Shield EZ: 23.81 oz; width 1.04 in; height 5.05 in; capacity 8S&W does not say whether the weight includes a magazine; we read no 9mm barrel or length figure
Sig Sauer P365-380 and P365 CoyoteP365-380, SKU 365-380-BSS: 15.7 oz [445 g], magazine not stated; barrel 3.1 in; length 5.8 in; width 1.0 in; (2) 10rd Steel MagP365 (Coyote), SKU 365-9-CXR3P: 18 oz w/Magazine; barrel 3.1 in; length 5.75 in; width 1.1 in; (2) 10rd Steel MagThe weights carry different conditions and are not comparable
Ruger LCP MAX and MAX-9LCP MAX, 13754: 10.6 oz.; barrel 2.80"; length 5.17"; height 4.12"; slide width 0.75"; capacity 10+1MAX-9, 3518: 18.4 oz.; barrel 3.20"; length 6"; height 4.52"; slide width 0.95"; two 10-round magazinesTwo models of different size; Ruger does not say whether the weight includes a magazine
Ruger Security-380 and Security-9 CompactSecurity-380, 3839: 19.7 oz.; barrel 3.42"; length 6.52"; height 4.35"; slide width 1.02"; capacity 15+1Security-9 Compact, 3829: 22.5 oz.; barrel 3.42"; length 6.52"; height 4.35"; slide width 1.02"; capacity 10+1Ruger prints no condition for either weight, so no difference is printed; capacity differs

Springfield Armory lists the Hellcat .380 OSP at 16.1 oz with the flush magazine and the 9mm Hellcat OSP at 17.9 oz. Both ship with an 11-round and a 13-round magazine. The 9mm version is listed 1.8 oz heavier, with the same length, height, barrel and grip width.

Sig Sauer lists the 9mm P938 1.1 oz heavier than the .380 P238, each with magazine. The P938 also has the longer barrel, 3 in against 2.7 in, and the longer overall length, 5.9 in against 5.5 in. These are two models rather than one pistol in two calibers, and both come with a 6-round and a 7-round magazine.

Kimber's manual lists the Micro 9 at 15.6 ounces and the Micro .380 ACP at 13.4 ounces, both with an empty magazine: 2.2 oz apart. The Micro 9 has a 3.15 in barrel and a 6.1 in length. The Micro .380 has a 2.75 in barrel and a 5.6 in length. Kimber lists a magazine capacity of 7 for both SKUs we read.

Glock lists the G43 at 17.99 oz and the G42 at 13.76 oz, each with an empty magazine: 4.23 oz apart. Both hold six rounds. The G43X is taller: Glock lists it with a 10-round magazine and a height of 5.04 inch, against 4.25 inch for the G43.

Smith & Wesson lists the same width and height for both Shield EZ models, 1.04 in and 5.05 in, and a capacity of 8 for each. It lists the 9mm at 23.81 oz and the 380 at 18.5 oz without saying whether a magazine is included.

Sig Sauer says the P365-380 has a "Shared FCU and grip module with P365 9mm". SIG also describes a "lightened slide and barrel making it completely compatible with all existing P365 holsters". Both SKUs we read have a 3.1 in barrel and two 10-round magazines. SIG lists the P365-380 at 15.7 oz with no magazine note, and the P365 Coyote at 18 oz with magazine, so we print no difference.

Ruger's LCP MAX and MAX-9 are two models of different size, with no magazine note on either weight. Capacity also follows the SKU: Ruger lists the LCP MAX 13754 at 10+1 and the LCP MAX 23702, with a Magpul grip extension, at 13+1.

Ruger prints the same length and height for the Security-380 (3839) and the Security-9 Compact (3829). Barrel length and slide width also match. It lists 19.7 oz for the .380 and 22.5 oz for the 9mm. Neither weight cell says whether a magazine is included, so we print no difference. Ruger lists the Security-380 at 15+1 and the Security-9 Compact at 10+1.

Some comparisons give a .380 pistol a much smaller magazine than a 9mm. In every other same-maker pair in the table, the .380 and 9mm versions are listed with the same capacity. In Ruger's Security pair, the .380 is listed with the larger one.

Recoil and racking the slide

Sig Sauer says the P365-380 is a micro-compact "offering less recoil, less racking force, and less compromise". It also says the pistol "was designed for all shooters, especially those with smaller hands and those who find the manipulation and recoil management of 9mm caliber pistols challenging." Springfield Armory describes the Hellcat .380 as having a "softer shooting impulse". Smith & Wesson's spec sheet for the M&P380 Shield EZ lists "Easy to rack slide." In its February 2018 launch release, Smith & Wesson said "we reduced the amount of force required to rack the slide". None of these statements includes a force or recoil figure.

None of our sources measures recoil for either cartridge in any pistol, so we print no recoil number. Published comparisons give recoil percentages that disagree with each other and name no test.

Slide force has been measured, by two writers with two methods. In Shooting Sports Retailer (December 14, 2020), Doug Larson used a Brownells Recording Trigger Pull Gauge to measure the force needed to pull the slide all the way to the rear, on one sample of each pistol. He reports averages of about 12.9 pounds for the M&P9 Shield EZ and about 13.75 pounds for the M&P380 Shield EZ. In that test, the 9mm Shield EZ needed less force than the .380 one. He lists about 16.25 pounds for a full-size M&P9 and about 11.6 pounds for a Remington RM380, and adds that "there is very little area to grip the slide on the RM380 and LCP compared to the M&P380".

In Handguns (June 19, 2023), Keith Wood clamped a Ruger Security-380 in a padded bench vise and hooked a Timney trigger pull scale around the rear sight. He writes: "The force was measured repeatedly at 7.5 pounds." His SIG P365 9mm exceeded the 10-pound reading of his scale without moving the slide out of battery. He also notes "no standardized method of measuring this variable". The two tests used different methods, so their numbers are not set side by side.

Kimber lists a recoil spring of 8.0 pounds for the Micro Two-Tone .380 and 11.5 pounds for the Micro 9 Stainless. Kimber gives no racking force for either. SIG's stated design target, shooters with smaller hands, is the maker's intent, not a measurement. In the one same-model slide test we found, the .380 version needed more force than the 9mm.

Blowback or locked breech?

Sig Sauer lists "Striker" for the P365-380 and the P365 Coyote, and "Single Action Only (SAO)" for the P238 and P938. Glock lists "Safe Action" for the G42 and G43. Smith & Wesson lists the M&P380 Shield EZ as "Internal Hammer Fired". Kimber lists one operation for the Micro and Micro 9: "Recoil-Operated Closed Breech Single Action Semi-Automatic".

None of the maker spec pages we read for these pistols uses the word blowback; what they list is the firing system (striker, internal hammer or single action only), not how the barrel and slide lock. Whether most small .380s are blowback is not something these pages settle.

Glock's instructions for use cover its Safe Action pistols and list the G42 and G43 in their technical data. They say: "The barrel (2) is mechanically locked". SIG's P365 manual says "The P365 is offered in .380 and 9mm." It calls the P365 "a mechanically locked, short-recoil-operated, striker-fired pistol", and that description does not separate the two calibers.

Kimber's Micro and Micro 9 manual lists "Barrel locking lugs inside slide and on barrel" among its lubrication points. Ruger's LCP MAX spec sheet says "Patented barrel cam geometry delays unlocking, slows the slide". Each of these statements covers that maker's own models only.

Penetration and the 1989 FBI article

In a November 1989 FBI Law Enforcement Bulletin article, the FBI listed 12 inches of penetration in 10% ballistic gelatin as the minimum acceptable and 18 inches as the maximum desirable. The same article says no maximum penetration standard was established; 18 inches was the depth it used when assessing tissue displaced. It also says: "Without adequate penetration, physiological incapacitation cannot be attained."

Some comparisons present 12 to 18 inches as a window the FBI requires today. The 1989 article set 12 inches as a minimum and no maximum standard. No current FBI protocol document was among our sources, so we make no claim about what the FBI requires now.

The 1989 article lists eight penetration tests, among them "Heavy Clothing @ 10 feet", "Wallboard @ 10 feet" and "Auto Windshield Glass @ 10 feet". None of our sources reports a .380 load fired in that 1989 test series.

Federal published results from its own testing for one .380 load, the 99 gr Hydra-Shok Deep 380 Auto. In a January 14, 2020 news release, Federal says testing by its engineers in Anoka, Minnesota "showed typical results of 13 to 13 ½ inches of penetration in bare gel and 13 ¼ to 14 inches through heavy clothing." It says the test guns were compact handguns with barrels of 2 ¾ to 3 ½ inches. Federal's product page for the load (P380HSD1) prints no measured depth.

Speer's 2025 catalog prints gel results for some loads but none for its 380 Auto Gold Dot. None of our sources gives a .380 and a 9mm gelatin result from the same maker and test.

Carrying the pistol you chose

Every holster in our concealed carry holster guide is molded for a list of pistols, and the guide says to check that the model you order names your gun. In that guide, the BlackHawk SERPA CQC card is the Glock 42 model. The Bianchi 100 listing there covers 61 models for revolvers, .380s and full-size pistols.

Sig Sauer says "The P365-380 fits all standard P365 holsters." FOBUS lists its SG365 holster for the "SIG P365, P365X, P365XL, P365-380, ROMEOZERO ELITE version". 1791 Gunleather puts the Smith & Wesson M&P 380 Shield EZ and the M&P Shield EZ in Size 1 of its 2-Way Multi-Fit IWB holster. It heads its Size 2 group "Micro .380s & micro-9s", listing the Glock 42, 43 and 43X. A holster size group is the holster maker's fit list, not a statement that the pistols are the same size.

A red dot has to match the cut on the slide. Sig Sauer says: "The P365-380 slide includes an optic cut compatible with the ROMEO-X COMPACT or any optic with the same footprint." SIG lists the P365 Coyote footprint as "COMPACT (Shield RMSc)" and prints no footprint cell for the P365-380. Our P365 red dot picks cover optics-ready P365 slides and do not name the P365-380, so confirm the footprint on your slide first.

Springfield Armory says of the Hellcat .380: "The slide is milled to accept direct mounting of today’s leading micro red-dot optics." That page names no footprint. Our Hellcat red dot picks cover the Hellcat OSP and Hellcat Pro and do not name the .380 model.

How we researched this: cartridge names, dimensions, pressures and test-barrel velocities come from SAAMI's ANSI/SAAMI Z299.3-2022 standard, with alternative names from C.I.P.'s Tab IV sheets. Load figures come from the ammunition makers' own pages and catalog: Speer, Federal and Hornady. Pistol figures come from the pistol makers' spec pages, spec sheets and manuals: Springfield Armory, Sig Sauer, Kimber, Glock, Smith & Wesson and Ruger. The ammunition-marking guidance comes from SAAMI's interchangeability statement and from Sig Sauer's P365 manual and parts pages. Federal's .380 gel results come from its January 14, 2020 news release. Holster fit comes from Sig Sauer, FOBUS and 1791 Gunleather. Penetration criteria come from the November 1989 FBI Law Enforcement Bulletin. Slide-force measurements come from Shooting Sports Retailer and Handguns. Ranking articles, forums and video comments were read to see what readers ask; no number, date or rule on this page comes from them. Sources are named in the text, not linked. This is a research summary, not a hands-on test. See our methodology.

FAQ

Is .380 the same as 9mm Short?

Yes by name. The European proof commission C.I.P. calls the cartridge 9 mm Browning court and prints 9mm Browning Kurz (short, corto), 9 mm kurz, 380 ACP and 380 Auto(matic) as alternative names. SAAMI names it 380 Automatic. It is not the 9mm Luger, which C.I.P. also calls 9 x 19 (mm). SAAMI's drawings give the 380 Automatic a case length of .680 in and the 9mm Luger a case length of .754 in.

Can you shoot .380 in a 9mm pistol?

SAAMI's statement on firearm and ammunition interchangeability does not name the 380 Automatic or the 9mm Luger. It says: "Firearms should only be used with the ammunition designated by the firearm manufacturer for use in that firearm." It also says: "The discharge of ammunition which does not match the firearm markings can be dangerous and can result in serious injury or death to the user and/or bystanders, as well as damage to the firearm." SIG's P365 manual says: "The proper caliber is permanently engraved on your firearm; never attempt to use ammunition of any other caliber." SIG's page for its flush-fit 10-round 380 Auto magazine for the P365X and P365-XL says it is "Not recommended for use with standard 9mm P365" and names the P365-XMACRO, AXG and FUSE in the same note. For the P365, SIG lists a CAL-X kit (SKU 8900719) and says: "This complete CAL-X KIT allows you to convert your P365 to a P365-380." The kit's listed contents include a complete slide assembly and a "3.1-in 380AUTO barrel." SIG also lists the kit as "Not compatible with CA Compliant Fire Control Units (FCU)".

Do .380 and 9mm use the same bullet?

Close, but SAAMI prints two different figures. Its cartridge drawings give a bullet diameter of .3565 in for 380 Automatic and .3555 in for 9mm Luger. The .355 in figure that many comparisons quote is the groove diameter, and SAAMI prints that same .355 in for both chambers. The 9mm Luger case is the longer of the two.

Is a 9mm pistol much bigger than a .380?

Not always. Springfield Armory lists the Hellcat 3" OSP at 16.1 oz in .380 ACP and 17.9 oz in 9mm, both with the flush magazine. Both versions are listed with a 6" length, a 3" barrel and an 11-round and a 13-round magazine. Other pairs differ more: Glock lists the G42 at 13.76 oz and the G43 at 17.99 oz, each with an empty magazine.

Does .380 recoil less than 9mm?

The makers say so for their own pistols, without a figure. SIG says the P365-380 offers less recoil and less racking force, and Springfield Armory describes a softer shooting impulse for the Hellcat .380. None of our sources measures recoil. Shooting Sports Retailer measured slide force on one sample each: about 12.9 pounds for the 9mm M&P Shield EZ and about 13.75 pounds for the M&P380 Shield EZ.

Is .380 enough for self-defense?

Our sources do not settle that, so we give no verdict. A November 1989 FBI Law Enforcement Bulletin article listed 12 inches of penetration in 10% ballistic gelatin as the minimum acceptable and said no maximum penetration standard was established. Speer's 2025 catalog prints gel results for some loads but none for its 380 Auto Gold Dot. Federal published results from its own testing for one .380 load, the 99 gr Hydra-Shok Deep. None of our sources gives a .380 and a 9mm gelatin result from the same maker and test.

Is there .380 +P ammo?

Not in the SAAMI standard. SAAMI's current pistol standard (Z299.3-2022) lists the 380 Auto with no +P version. Its +P entries are 9mm Luger, 38 Special, 38 Super Automatic and 45 Automatic. SAAMI sets the 9mm Luger +P maximum average pressure at 38,500 psi, against 35,000 psi for 9mm Luger and 21,500 psi for 380 Auto, by the transducer method.

OpticVerdict Editorial Team · research-based buying guides

Every award, spec and superlative in this guide is checked against a primary source before it is published, and every rating we cite is shown attributed to where it comes from. Read how we evaluate or learn more about this site.

Source-verified claims Attributed ratings only Method disclosed on every page

Next: best concealed carry holsters · best red dots for a Sig P365 · best red dots for a Hellcat · 9mm vs 45 ACP · all guides.